MPV LX 2WD V6-3.0L SOHC (1998)
9. Verify that the timing mark (yellow) is within the specification.
Specification:
ATDC 2 - BTDC 34°
Idle Speed
1. Perform "Preparation".
2. Verify that the idle speed is within the specification.
Specification:
760 - 800 (780 ± 20) rpm
CAUTION: The throttle adjusting screw is set at the factory and must not be adjusted. Any adjustment will negatively affect the engine's
performance.
3. If not within the specification, adjust the idle speed by turning the air adjusting screw.
4. Press SET UP and turn the test mode off. (press OFF)
5. Press CLEAR to clear previously selected items.
6. Disconnect the SSTs.
Idle Up Speed
1. Perform "Preparation".
2. Press SET UP and turn the test mode off. (press OFF)
3. Press CANCEL.
4. Press START.
5. Verify that the idle speed is within the specification.
Specification:
760 - 800 (780 ± 20) rpm
6. If not as specified, adjust the idle speed.
7. Check the idle speed with the following load conditions.