MPV LX 2WD V6-3.0L SOHC (1998)
Seat Belt Retractor: Testing and Inspection
Rear No.1
Seat Belt ELR
1. Verify that the belt can be pulled out smoothly, and that it moves smoothly when worn.
2. Verify that the retractor locks when the belt is quickly pulled.
3. Remove the retractor.
4. Hold the retractor as it would be installed.
5. Slowly incline the retractor while pulling out the belt.
6. Verify that the retractor locks at approximately 30° inclination.
7. If not as specified, replace the rear No.1 seat belt.
Seat Belt ALR
1. Pull the belt out fully, and the lock mode changes from ELR to ALR.
2. Verify that retractor makes a clicking sound as the belt slowly retracts. If no sound is heard, the lock mode has not changed to ALR.
If necessary, repeat the above step 1.
3. Verify that the belt locks when pulled.
4. Verify that the lock mode changes to ELR when the belt fully retracts.
5. If not as specified, replace the rear No.1 seat belt.