MPV LX 2WD V6-3.0L SOHC (1998)
5. Set the housing on a press and press in the seal.
Spacer, Oil Seal assembly Note (6)
1. Set the new oil seal on the SSTs (49 L032 304 and 49 L032 303) as shown.
2. Remove the SST (49 L032 304).
3. Set the oil seal on the rack through the rack teeth by using the SST (49 L032 303) as shown.
4. Apply grease to the flat surface of the spacer.
5. Set the spacer so that the grease coated surface contacts the oil seal.
6. Apply ATF to the spacer and the oil seal.
7. Insert the rack from the tube side.
Rack Bushing Assembly Note (9)