MPV LX 2WD V6-3.0L SOHC (1998)
5. Remove the grommets as shown.
6. Apply protective tape along the edge of the body to protect it from damage.
7. Remove the front header trim.
8. Use protective tape or cloth along the front edge of the headliner to protect it from damage.
9. Make a hole through the sealant from the inside of the vehicle by using an awl.
10. Pass piano wire through the hole.
11. Wind each end of the wire around a bar.
12. Working with another person, saw through the sealant around the edge of the glass. Use a long sawing action to spread the work over the whole
length of wire to prevent it from breaking.
13. Remove the glass.