MX-3 L4-1598cc 1.6L DOHC (1995)
^
The Midtronics tester requires 10.2V or higher to test and provides an indicator lamp confirming that the battery is OK to test. See Special Tool
Bulletin Cat. ST, No. (003/95 revision 8/22/95) for Midtronics purchase information.
5. Charging and Load Testing Information
The chart gives specific charging amps, times and load test amps for 1993 -'95 vehicles.
Refer to the applicable workshop manual for other model year vehicles and additional troubleshooting information.
6. Battery Cold Cranking Amperage (CCA) Ratings
NOTE:
CCA Rating Numbers (usually stamped on battery covers) are required for use with the Midtronics PowerSensor Plus Battery Tester.