MX-3 L4-1598cc 1.6L DOHC (1995)
Replace the oil pump with a new one.
NOTE:
^
Oil pump replacement is necessary. If the plunger was seized, there is a possibility that the control plunger cylinder is worn.
^
If replacing the pump with a pre-modified oil pump, install the modified plunger to prevent concern reoccurence.
PARTS INFORMATION for REPAIR 1
WARRANTY INFORMATION for REPAIR 1
(Applies To Verified Customer Complaints On Vehicles Covered Under Normal Warranty. Refer To The SRT Microfiche For Warranty Term
Information.)
REPAIR 2
Replace exhaust valve and springs with modified parts.
NOTE:
DO NOT replace HLA's to correct this concern.
PARTS INFORMATION for REPAIR 2