MX-3 V6-1844cc 1.8L DOHC (1993)
Transmission Temperature Sensor/Switch: Service and Repair
Replacement
WARNING: Be careful when working; the oil Is hot.
NOTE: The ATF thermosensor terminals are in the solenoid connector.
1. Disconnect the negative battery cable.
2. Remove the resonance duct and the air cleaner assembly.
3. Remove the control valve body.
4. Remove the solenoid connector.
5. Install a new O-ring to the new solenoid connector and lubricate it with ATF.
6. Install the solenoid connector in the transaxle case.
7. Install the control valve body.
8. Install the air cleaner assembly and the resonance duct.
9. Connect the negative battery cable.
Inspection