MX-5 Miata L4-2.0L (2008)
![background image](/mazda/mx-5_miata/l4-2.0l/Page-1177001.png)
Brake Master Cylinder: Service and Repair
MASTER CYLINDER REMOVAL/INSTALLATION
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
Master Cylinder Installation Note
Caution
^
If the master cylinder is installed at an angle, the master cylinder piston may push against the push rod retainer of the power brake unit
causing poor air bleeding, brake drag, or other malfunctions. Be sure to install the master cylinder at a perpendicular angle to the power
brake unit.
1. Install the SST to the power brake unit and tighten to the specified torque.
Tightening torque 13.7-21.6 N-m (1.4-2.2 kgf-m, 10.2-15.9 ft-lbf)