MX-5 Miata L4-2.0L (2008)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Antilock Brake System
ABS HU/CM REMOVAL/INSTALLATION
Caution
^
When replacing the DSC HU/CM with a new one, configuration procedure must be performed before removing the DSC HU/CM. If
configuration is not completed before removing the DSC HU/CM, DTC B2477 will be detected.
^
The internal parts of the ABS HU/CM could be damaged if dropped. Be careful not to drop the ABS HU/CM. Replace the ABS HU/CM if
it is subjected to an impact.
1. Perform ABS configuration. (See ABS CONFIGURATION.) See: Testing and Inspection/Programming and Relearning/ABS Configuration
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
ABS HU/CM Connector Removal Note
