MX-5 Miata L4-2.0L (2008)
5. Move the cooler pipe No.3 and heater pipe slightly out of the way.
6. Remove the service hole cover.
4. Disconnect the heater hose and move the heater pipe slightly out of the way.
5. Disconnect the heater hose and move the heater pipe slightly out of the way.
6. Remove the harness bracket.
7. Remove the under cover.
8. Disconnect the variable intake air solenoid valve connector, EGR valve connector, CMP sensor connector and PSP switch connector.
9. Disconnect the ignition coil connector and fuel injector connector and move the harness slightly out of the way.
10. Disconnect the quick release connector from the fuel distributor.
11. Remove the fuel distributor.
12. Disconnect the water hose from the EGR valve.
13. Disconnect two water hoses from the thermostat.