MX-5 Miata L4-2.0L (2008)
Transmission Speed Sensor: Testing and Inspection
TURBINE SENSOR INSPECTION [SJ6A-EL]
Caution:
^
Water or foreign material entering the connector can cause poor connections or corrosion. Be sure that water or foreign material do
not enter the connector when disconnecting it.
1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Disconnect the turbine sensor connector.
Caution:
^
Do not apply a shock in the turbine sensor.
^
Do not damage the terminals.
4. Measure the resistance between the turbine sensor terminals.
^
If there is any malfunction, replace the turbine sensor.
Turbine sensor resistance
560 - 680 ohm
5. Connect the turbine sensor connector.
6. Connect the negative battery cable.
7. Install the battery cover.