MX-5 Miata LS L4-1.8L DOHC (2001)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
ABS MU/CM REMOVAL/INSTALLATION
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
Connector Removal Note
1. Pull the lock lever to disconnect the connector.
ABS MU/CM Removal/Installation Note
1. When removing/installing the ABS MU/CM from/to the vehicle, attach a strip of protective tape on the ABS HU/ CM connector to prevent brake
fluid from entering.
Connector Installation Note
