MX-5 Miata LS L4-1.8L DOHC (2001)
Canister Purge Solenoid: Service and Repair
PURGE SOLENOID VALVE REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove in the order indicated below.
1. Clamp
2. Evaporative hose
3. Vacuum hose
4. Purge solenoid valve
3. Install in the reverse order of removal.
Vacuum Hose, Evaporative Hose Installation Note
1. Install the vacuum hose and evaporative hose until it contacts the stopper.