mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

M/T - Won't Shift Into 5th or Reverse gears|Page 2597 > < M/T - Won't Shift Into 5th or Reverse gears|Page 2591
Page 1
background image

Shift Linkage: Customer Interest
M/T - Won't Shift Into 5th or Reverse gears

05-012/02

1999-2003 MIATA - 6-SPEED MANUAL TRANSMISSION WILL NOT SHIFT INTO 5TH OR REVERSE GEARS

APPLICABLE MODEL(S)/VINs
1999-2003 Miata models with 6-speed manual transmission

DESCRIPTION

Transmission will not shift into 5th or reverse gears. Symptoms may occur after inspecting or changing gear oil.

NOTE:

DO NOT remove 8 mm-hex "Crank Lever Shaft" to drain/fill gear oil. Removal of the "Crank Lever Shaft" will allow the "5th / Reverse Counter
Lever" to fall into the transmission causing no shift into 5th and reverse gears.

NOTE:

Only use 24 mm drain and fill plugs on other side of transmission when inspecting or changing gear oil.

Follow the procedure outlined below to correct the condition.

REPAIR PROCEDURE

1.

Verify customer complaint.

2.

Remove transmission assembly according to appropriate Workshop Manual (Section 05).

3.

Disassemble transmission and retrieve "5th / Reverse Counter Lever".

4.

Reinstall "5th / Reverse Counter Lever".

5.

Reinstall 8 mm-hex "Crank Lever Shaft".

a.

Apply sealant to the threads.

b.

Torque to 32-42 N.m. (24-34 lb.ft.)

M/T - Won't Shift Into 5th or Reverse gears|Page 2597 > < M/T - Won't Shift Into 5th or Reverse gears|Page 2591