MX-6 L4-1991cc 2.0L DOHC (1993)
Transmission Position Switch/Sensor: Service and Repair
Fig. 6 P Range Switch Connector Location
When troubleshooting shift-lock system, refer to Transmission and Drivetrain/Automatic Transmission/Transaxle/Shift Interlock.
1.
Disconnect negative battery cable.
2.
Remove selector lever knob, then the front console.
3.
Disconnect P range switch connector Fig. 6.
4.
Using a suitable ohmmeter, test for continuity as follows:
a. With selector lever in P range and and selector lever button released, continuity should exist.
b. With selector lever in P range and selector lever button depressed, no continuity should exist.
c. With selector lever in R, D, S or L ranges, no continuity should exist.
5.
If continuity tests are not to specifications, replace P range switch.