MX-6 L4-2184cc 2.2L SOHC F2 (1988)
c)
Install P/S pipe clip.
Tightening torque:
69 - 98 N-m, 70 - 100 cm-kg, 61 - 87 in.lb.
d)
Connect P/S pump and high pressure hose. (Refer to step 2 of Installation.)
Tightening torque:
39 - 59 N-m, 4.0 - 6.0 m-kg, 29 - 43 ft.lb.
6B. Vehicles without A/C
Install idler pulley.
a)
Install idler pulley on engine block.
b)
Install V-belt and adjust it.
c)
Install P/S pipe clip on pulley bracket.
Tightening torque:
69 - 98 N-m, 70 - 100 cm-kg, 61 - 87 in.lb.
d)
Connect P/S pump and high pressure hose. (Refer to step 2 of Installation.)
Tightening torque:
39 - 59 N-m, 4.0 - 6.0 m-kg, 29 - 43 ft.lb.
FIGURE 10
7.
Install low pressure hose.
a)
Remove reserve tank.
b)
Replace return hose.
c)
Install reserve tank.
NOTE:
Align reserve tank rib with a paint marking on return hose.
d)
Secure return hose with hose clamp.