mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Campaign - Main Fuse Block & Connector|Page 4310 > < Diagram Information and Instructions|Page 4301
Page 1
background image

Technical Service Bulletin # SSP06

Date: 880101

Campaign - Main Fuse Block & Connector

TSB # SSP06

January 20, 1988

TO:

All Mazda Dealers

ATTENTION:

All General Managers, Service Managers & Parts Managers

SUBJECT:

1988 MX-6 Main Fuse Block & Connector (X-04) Special Service Program --- SSP06

Mazda Motor Corporation has decided to conduct a special service program for the main fuse block and connector on certain 1988 MX-6 models
starting on January 22, 1988.

Mazda has found that some 1988 MX-6 vehicles might have improper installation of electrical terminals in the main fuse block and connector. If this
condition is left as it is, there is a possibility that the terminals in question may come out of position in the main fuse block and/or the connector thereby
causing a malfunction of related electrical circuits.

Detailed procedures for this program are shown on attachment sheet I and II. The lefter to be sent to the owners is attachment sheet III.

Should you have any questions, please feel free to contact your District Service Manager or Regional/Distributor office.

We appreciate the special enthusiasm and support you always show us when it is necessary to carry out a special service program.

Attachment I

1988 MX-6 Main Fuse Block & Connector (X-04) Special Service Program - SSP06

A.

Description of Program

The owners of subject vehicles will be notified on and after January 22, 1988 by first class mail to bring their vehicles to an authorized Mazda
dealer for inspection/repair. This program will commence on January 22, 1988 and close on January 21, 1989.

B.

Subject Vehicles

The subject vehicles are certain 1988 MX-6 models Produced in the U.S.A. within the following VIN ranges.
*

: The last digit can be a number or X.

C.

Dealer Inventory Vehicles

All subject vehicles in dealer inventory must be inspected and, if necessary, repaired prior to delivery to the customer.

D.

Necessary Parts

None

NOTE:
It is not basically necessary to replace the part. Just in case, however, the following parts will be shipped (or are enclosed) to you free of charge.

If additional parts are needed:
^

for the territory of MMA-C, contact the Quality Assurance Department of your Regional/Distributor Office

^

for the territory of MMA-E, contact the Warranty Department

1.

For Main Fuse Block

(1)

Fuse, 30A     (H115 67 099)*      2 pcs.

(2)

Fuse, 40A     (H116 67 099)*      2 pcs.

(3)

Fusc, 60A     (FB01 67 099)*      2 pcs.

(4)

Terminal** (L) (No Part Number) 5 pcs.

(5)

Terminal** (S) (No Part Number) 5 pcs.

Campaign - Main Fuse Block & Connector|Page 4310 > < Diagram Information and Instructions|Page 4301