MX-6 L4-2184cc 2.2L SOHC Turbo F2 (1989)
Manual and Power Mirrors
1.
Using a flat screwdriver, carefully pry the inner sail garnish out of its position. (Start prying at the top comer of the sail garnish then work
downward.)
CAUTION:
TAKE CARE NOT TO BREAK THE FASTENING TAB AT THE BOTTOM OF THE SAIL GARNISH.
2.
Remove mirror and install comer bracket.
3.
Install Pad 1 on the side of the base. Figure 1.
4.
Install Pad 2 on lower side of base. Figure 1.
5.
Install Pad 3 (triangular pad) as shown. Figure 1.
Power Mirrors Only
6.
Add respective (right and left) seal rubber to the mirror. Figure 2.
Manual Mirrors Only