MX-6 V6-2496cc 25L DOHC (1996) | Cooling System Hose/Line Component Inspection
Hose/Line HVAC: Service and Repair
Removal and Installation
1. Discharge the refrigerant from the system.
2. Remove as shown in the figure. Immediately plug the open fittings to keep moisture out of the system.
3. Install as shown in the figure. Apply clean compressor oil to the 0-rings. Do not apply compressor oil to the fitting nuts. When installing a new
pipe or hose, add
6 ml {6 cc, 0.2 fl oz} of compressor oil through the high-pressure side of the A/C compressor.
4. Evacuate, charge, and test the air conditioner system.
