MX-6 V6-2496cc 2.5L DOHC (1996)
Purge Solenoid Valve: Testing and Inspection
Purge Solenoid Valve Testing 1
Inspection
1. Remove the purge solenoid valve.
2. Apply vacuum to port A using a vacuum pump and verify that no air flows through the purge solenoid valve.
Purge Solenoid Valve Testing 2
3. Apply battery positive voltage to the purge solenoid valve as shown in the figure.
4. Apply vacuum to port A using a vacuum pump and verify that air flows through the purge solenoid valve.
5. If not as specified, replace the purge solenoid valve.