MX-6 V6-2496cc 2.5L DOHC (1996)
Transaxle Fluid Temperature Sensor: Service and Repair
TRANSAXLE FLUID TEMPERATURE SENSOR REPLACEMENT
1. Remove the control valve body cover.
2. Disconnect the transaxle fluid temperature sensor connector.
Install Transaxle Fluid Temperature Sensor By Using The SST
3. Remove the transaxle fluid temperature sensor by using the SST.
4. Install a new transaxle fluid temperature sensor by using the SST.
Tightening torque: 7.9-10.7 Nm (70-95.4 in.lbs.)
5. Connect the transaxle fluid temperature sensor connector.
6. Install the control valve body cover.
7. Carry out the line pressure test.