MX-6 LS V6-2.5L DOHC (1997)
Terminal Identification
Action Chart
Step 5
Measure the voltage at the power-side terminals of the brake lights with the brake pedal depressed.
Rear combination light: terminal C (W/G) [626] or H (W/G) [MX-6]
Inboard combination light: terminal B (W/G)
High-mount brake light: terminal A (B/G) [without rear spoiler] or terminal A (W/G) [with rear spoiler]
Pinpoint Test 2
Flowchart No.2 Symptoms Brake light on one side does not illuminate
Possible Cause
^
Burnt light bulb
^
Open or short circuit in wiring harness Poor connection of connector
Bulb Inspection
Action Chart
Step 1
Remove and check the brake light bulb.
Terminal Identification