MX-6 LS V6-2.5L DOHC (1997)
Combination Switch: Service and Repair
Removal and Installation
Removal/Installation
1. Disconnect the negative battery cable.
2. Remove the driver-side side panel and lower panel.
3. Disconnect the clock spring connector.
WARNING: Handling the air bag module improperly can accidentally deploy the air bag, which may seriously injure you. Read
SERVICE PRECAUTION under Restraint Systems before handling air bag module.
See: Restraint Systems
4. Remove in the order shown in the figure.
5. Install in the reverse order of removal.