MX-6 LS V6-2.5L DOHC (1997)
Crankshaft Position Sensor: Component Tests and General Diagnostics
Resistance Inspection
1. Disconnect the crankshaft position sensor connector.
Crankshaft Position (CKP) Sensor Details
2. Measure the resistance between terminals A and B by using an ohmmeter.
Specification: 520-580 Ohms 20°C (68°F)
3. If not as specified, replace the crankshaft position sensor.
Air Gap Inspection
Crankshaft Position (CKP) Sensor Details
1. Verify that the crankshaft position sensor is installed correctly and securely.
2. Measure the air gap between the crankshaft pulley and the crankshaft position sensor by using a feeler gauge.
Specification: 0.5-1.5 mm (0.020-0.059 in.)
3. If not as specified, replace the crankshaft pulley or the crankshaft position sensor.