MX-6 LS V6-2.5L DOHC (1997)
EGR Solenoid Valve: Testing and Inspection
EGR Solenoid Valve (Vacuum)
1. Remove the EGR solenoid valve (vacuum).
EGR Control System Vacuum Solenoid Valve Testing
2. Apply battery positive voltage to terminal A and ground terminal B of the EGR solenoid valve (vacuum). Verify that air flows as shown below.
EGR Control System Vacuum Solenoid Valve Test Specifications
3. If not as specified, replace the EGR solenoid valve (vacuum).
EGR Solenoid Valve (Vent)
1. Remove the EGR solenoid valve (vent).
EGR Control System Vent Solenoid Valve Inspection 1
2. Verify that air flows as shown below.
EGR Control System Vent Solenoid Valve Inspection 1 Details
3. If not as specified, replace the EGR solenoid valve (vent).