MX-6 LS V6-2.5L DOHC (1997)
Fuel Distributor: Testing and Inspection
Fuel Leakage Test
Fuel Injector Leakage Inspection
1. With the fuel injector assembly removed, install the fuel hoses as shown in the figure.
DLC-1 Fuel Pump Relay Jumper Location
DLC-1 Fuel Pump Relay Jumper Location
2. Connect the data link connector terminals F/P and GND with a jumper wire.
3. Turn the ignition switch to ON and check for fuel leaks from the fuel distributor.
4. If fuel leaks, check the fuel injector 0-rings and fuel distributor for damage.
Injector Resistance
NOTE: It is not necessary to remove the fuel injectors to perform the following procedure.
Fuel Injector Resistance Inspection Details
