Protege L4-1839cc 1.8L DOHC (1990)
Brake Drum: All Technical Service Bulletins
Brakes - Rotor and Drum Inspection Criteria
Bulletin No.
003/91
Issued
10/9/91
Revised
Category P
Applicable Model/s All Models 1989-'92
Subject:
BRAKE ROTOR/DRUM
INSPECTION CRITERIA
DESCRIPTION
When inspecting the brake rotor or drum for wear, refer to the following to detemine if a rotor/drum can be resurfaced by machining.
INSPECTION PROCEDURE
Brake Rotor Inspection:
Many rotors have been replaced unnecessarily for brake noise. If the rotors do not contain cracks or deep grooves, and the remaining rotor thickness
allows for machining, the rotors should be resurfaced.
NOTE:
Minimum allowed rotor thickness is stamped on rotor surface.
Rotor Thickness Specification:
MPV 1992
4X2
New
30.0 mm (1.18 in)
Minimum
28.0 mm (1.10 in)
4X4
New
28.0 mm (1.10 in)
Minimum
26.0 mm (1.02 in)
MPV 1989-'91
4X2 & 4X4
New
24.0 mm (0.94 in)
Minimum
22.0 mm (0.87 in)
B-Series 1989-'92
4X4
New
22.0 mm (0.87 in)