Protege L4-1839cc 1.8L DOHC (1990)
1. Use the SST to press in a new oil seal.
2. Press in by placing the flat plate against the bearing.
Caution: Apply grease to the oil seal and bearing.
3. Use the SST to tighten the plug to the gear housing.
Adjusting Cover
1. Apply sealant to the adjusting cover and temporarily tighten it to a torque of 11 Nm (110 cm-kg, 95 in-lb).
2. Move the rack back and forth approx. 3 times and loosen the adjusting cover.
3. Retighten the adjusting cover 10 the specified torque and then loosen it 0-40 degrees.
Tightening torque:
4.4-5.4 Nm (45-55 cm-kg, 39-48 in-lb)
4. Tighten the locknut with the SST.
5. Measure the pinion starting torque with the SST and a pull scale.
Starting torque: