Protege L4-1839cc 1.8L DOHC (1990)
Caution:
Do not remove the wheel studs unless necessary.
Do not reuse the removed wheel.
1. Remove the wheel studs with a press.
ASSEMBLY
Wheel Stud
1. Install the new wheel studs with a press.
Dust Cover
1. Mark the new dust cover the same as the one removed.
2. Align the marks of the new dust cover and the knuckle.
Caution: Install the new dust cover as shown.
3. Install the new dust cover.
Wheel Bearing
1. Press the new wheel bearing in with the SST.
Wheel Hub