Protege DX L4-1.6L DOHC (2000)
5. Tighten bolts A to secure the SST (shaft).
6. Face the SST (body) toward the center of the cylinder head, and mount it on the SST (shaft) at the point of the adjustment shim to be replaced.
7. Face the notch of the tappet so that a fine screwdriver can be inserted.
8. Set the SST on the tappet by its notch.
9. Tighten bolt B to secure the SST (body).
Caution: Cylinder head can be damaged when the tappet is pressed down.
10. Tighten bolt C, and press down the tappet.