Testing and Inspection of Antenna Feeder in Protege DX L4-1489cc 15L DOHC MFI (1998)
Antenna: Testing and Inspection
Antenna Feeder
1. Remove the audio unit.
2. Remove the driver's side front scuff plate.
3. Remove the driver's side front side trim.
4. Disconnect the antenna jack from the pillar antenna.
5. Verity that there is no continuity between the antenna feeder terminals B and D.
6. Inspect for continuity between the antenna feeder terminals by using an ohmmeter.
7. If not as specified, replace the antenna feeder.