mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Sunroof / Moonroof Frame > < Rear Guide Stopper|Page 4179
Page 1
background image

Sunroof / Moonroof Track: Service and Repair
Guide Unit

REMOVAL

1. Remove the deflector.
2. Remove the lower panel.
3. Remove the guide rail cover.
4. Remove the front guide stopper.
5. Remove the sunroof motor.

6. Push the front of the retaining hook to disengage it from the frame, and then pull the guide unit to remove it.

INSTALLATION

1. Grease the contact area of the guide unit.

2. Insert the cable into the channel of the guide rail.

3. Verify that the spring is onto the retaining hook when the guide unit is inserted into the guide rail.

4. Move the guide by hand until the screw is aligned with the mark.
5. Install the sunroof motor.
6. Install the front guide stopper.
7. Install the guide rail cover.
8. Install the lower panel.
9. Install the deflector.

Sunroof / Moonroof Frame > < Rear Guide Stopper|Page 4179