mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Starting System > < Electrical Specifications|Page 3006
Page 1
background image

Alternator: Service and Repair

WARNING:

^

When the battery cables are connected, touching the vehicle body with generator terminal B will generate sparks. This can cause
personal injury, fire, and damage to the electrical components. Always disconnect the battery before performing the following operation.

CAUTION:

^

Reversing the battery connections or using high-volt age testers will damage the rectifier.

^

Do not start the engine while the connector is disconnected from terminals L and S. It can damage the generator.

NOTE:

^

Battery positive voltage is always present at generator terminal B when the battery is connected

1. Disconnect the negative battery cable.
2. Remove the pressure pipe stay. (BP)
3. Remove the EGR solenoid valve bracket. (BP)
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.

Starting System > < Electrical Specifications|Page 3006