Protege DX L4-1489cc 1.5L DOHC MFI (1998)
1. Raise the staked portion of the locknut by using a chisel.
2. Lock the hub by applying the brakes.
3. Remove the locknut.
Wheel Hub Component Removal Note
1. Remove the front wheel hub component by using the SSTs.
2. If the bearing inner race remains on the front wheel hub component, grind a section of the bearing inner race until approximately 0.5 mm (0.02
inch) remains. Then remove it by using a chisel.
Wheel Bearing Removal Note
-
Press out the wheel bearing by using the SSTs.
Dust Cover Removal Note
NOTE: The dust cover does not need to be removed unless replacing it.