Protege DX L4-2.0L DOHC (2002)
4.
Insert the foam protector strip into the gap between the molding and the body.
5.
Inspect the molding lip to make sure it has returned to it's original position, then remove tape.
6.
Verify repair.
PART(S) INFORMATION
WARRANTY INFORMATION
Note:
This information applies to verified customer complaints on vehicles covered under normal warranty. Refer to the SRT microfiche for warranty term
information.
Technical Service Bulletin # 0900901
Date: 011101
Body - Windshield Molding Wind Noise
Bulletin No: 09-009/01
Last Issued: 11/1/2001
Subject:
WIND NOISE FROM WINDSHIELD MOLDING
APPLICABLE MODEL(S)/VINS
All 1999-2002 Protege and 2002 Protege5.