Protege DX L4-2.0L DOHC (2002)
Power Door Lock Actuator: Service and Repair
Front Door Lock Actuator
FRONT DOOR LOCK ACTUATOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the door screen. (See FRONT DOOR LOCK AND OPENER REMOVAL/INSTALLATION.)
3. Disconnect the front door lock actuator connector.
4. Disconnect the rods from the outer handle and the door key cylinder.
5. Remove the screws, and then remove the front door lock.
6. Remove the screws, and then remove the front door lock actuator from the front door lock.
7. Install in the reverse order of removal.