Protege DX L4-2.0L DOHC (2002)
Blower Motor: Service and Repair
Blower Unit
BLOWER UNIT REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the dashboard.
3. Remove the cooling unit.
4. Remove the blower unit.
5. Install in the reverse order of removal.
BLOWER UNIT DISASSEMBLY/ASSEMBLY
1. Disassemble in the order indicated below.
1. Blower motor
2. Blower harness
3. Air intake actuator
4. Air intake crank
5. Air intake door
6. Polyurethane protector
7. Blower case (1)
8. Blower case (2)
2. Assemble in the reverse order of disassembly.
