Protege DX L4-2.0L DOHC (2002)
Canister Purge Solenoid: Service and Repair
PURGE SOLENOID VALVE REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove in the order indicated below.
1. Evaporative hose
(See Evaporative Hose Installation Note)
2. Vacuum hose
(See Vacuum Hose Installation Note)
3. Purge solenoid valve
3. Install in the reverse order of removal.
Vacuum Hose Installation Note
1. Install the vacuum hose until it contacts the stopper.
Evaporative Hose Installation Note
1. Attach the evaporative hose until it contacts the stopper.