Protege DX L4-2.0L DOHC (2002)
Combination Switch: Service and Repair
COMBINATION SWITCH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the driver-side air bag module.
3. Remove the steering wheel.
4. Remove the column cover.
5. Remove the clock spring.
6. Remove in the order indicated below.
1. Connector
2. Screw
3. Combination switch
7. Install in the reverse order of removal.
COMBINATION SWITCH DISASSEMBLY/ASSEMBLY
1. Disassemble in the order indicated below.
1. Screw
2. Wiper lever
3. Light lever
4. Body
2. Assemble in the reverse order of disassembly.