Protege DX L4-2.0L DOHC (2002)
Wiper Blade: Service and Repair
Windshield Wiper Arm and Blade
WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION
1. Remove in the order indicated below.
1. Cap
2. Nut
3. Windshield wiper arm (See Windshield Wiper Arm Installation Note)
4. Windshield wiper blade
5. Rubber brush
2. Install in the reverse order of removal.
3. Adjust the windshield wiper arm and blade.
Windshield Wiper Arm Installation Note
1. Clean the windshield wiper arm connector shafts using a wire brush before installing the windshield wiper arms.
