Protege ES L4-1839cc 1.8L DOHC (1997)
Fluid - A/T: Service and Repair
1. Remove the dipstick.
2. Remove the drain plug and washer.
3. Drain the ATF into a container.
4. Install a new washer and the drain plug. Tighten to 40 - 53 Nm (29 - 39 ft. lbs.).
5. Remove the dipstick and add the specified amount and type of ATF through the oil filler tube.
6. Install the dipstick.
7. Ensure that the dipstick is in the HOT 65°C (149°F) range.
8. Add ATF to the specified level if necessary.