Protege ES L4-1839cc 1.8L DOHC (1997)
Timing Belt: Service and Repair
Timing Belt Removal
CAUTION: The crankshaft position sensor rotor is on the rear of the crankshaft pulley, and can be damaged easily.
1. Disconnect the negative battery cable.
2. Remove the right front wheel.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal indicated in the table.
5. Install the right front wheel.
6. Connect the negative battery cable.
7. Start the engine and;
^
check the pulleys and the timing belt for runout and contact.
^
check the ignition timing.