Protege ES L4-1839cc 1.8L DOHC (1997)
Primary Shaft Gear (9)
1. Inspect the shaft gear runout. Maximum runout is 0.05 mm (0.002 inch).
2. Inspect the splines for damage and wear.
3. Inspect the gear teeth for damage, wear, and cracks.
Assembly Note
Bearing (8)
Install the bearing with a press.
3rd gear, 3rd synchronizer ring, and 3rd/4th clutch hub assembly (7, 6, 5)
CAUTION: Apply transaxle oil to the bore of 3rd gear.
Turn the primary shaft over and install the 3rd gear,3rd synchronizer ring, and 3rd/4th clutch hub assembly with a press.
4th Synchronizer Ring, Primary 4th Gear, And Bearing (3, 2, 1)
1. Install the retaining ring.
2. Install the 4th synchronizer ring, primary 4th gear, and ball bearing with a press.