Protege ES L4-2.0L DOHC (2001)
![background image](/mazda/protege_es/l4-2.0l_dohc/Page-651003.png)
- 6) The following screen will display.
As the Number of the STEPS: increases the voltage of the BARO should increase.
NOTE: While performing this step, the engine may stall. This is because the EGR is working normally.
- If the EGR control valve is working normally, the screen will display the following.
Number of the SEGRP @ STEPS: As an increasing Blue line.
Voltage of the BARO: As an increasing Blue line
- If the EGR control valve is NOT working normally, the screen will display the following:
Number of the SEGRP @ STEPS: As an increasing Blue line.
Voltage of the BARO: Will not change and the display will have a Red line