Protege ES L4-2.0L DOHC (2001)
Transmission Temperature Sensor/Switch: Service and Repair
TRANSAXLE FLUID TEMPERATURE (TFT) SENSOR REMOVAL/INSTALLATION
Warning:
-
When the transaxle and ATF are hot, they can badly burn. Turn off the engine and wait until they are cool before performing this
procedure.
1. Remove the oil pan.
2. Disconnect the TFT sensor connector.
3. Remove the TFT sensor.
4. Install a new TFT sensor.
5. Connect the TFT sensor connector.
6. Install the oil pan.
7. Carry out the mechanical system test.
