Protege LX L4-1.6L DOHC (2000)
Climate Control Unit: Service and Repair
Removal and Installation
REMOVAL
1. Disconnect the negative battery cable.
2. Disconnect the air intake, air mix, and airflow mode wires from each wire clamp and link.
3. Remove the center panel.
4. Remove the screws and the climate control unit.
INSTALLATION
1. Install the climate control unit to the center panel.
2. Pass each wire through the following routes then connect to each unit.
3. Connect the climate control unit connectors.
4. Install the center panel.
5. Adjust the climate control unit wire.
6. Connect the negative battery cable.
