Protege LX L4-1.6L DOHC (2000)
Wheel Fastener: Service and Repair
WHEEL HUB BOLT REPLACEMENT
1. Remove the hub bolt using the Special Service Tools (SSTs).
Note If the dust cover interferes with the wheel hub bolt and the wheel hub bolt cannot be removed, tap the part shown in the figure with a chisel
lightly and bend the processing point back to the steering knuckle side.
2. Install the hub bolt into the wheel hub and install a washer and hub nut on the hub bolt.
3. Tighten the hub nut while holding the wheel hub using a brass bar.