Protege LX L4-1489cc 1.5L DOHC MFI (1998)
ABS Main Relay: Testing and Inspection
ABS RELAY INSPECTION
Fail-Safe Relay Inspection (Including Harness To ABS Control Module)
1. Turn the ignition switch to off and disconnect the ABS control module connector.
2. Turn the ignition switch to ON.
3. Connect terminal 2J of the control module connector to a ground.
4. Verify the illustrated points.
5. If not as specified, inspect the wiring harness and the Fail-Safe Relay.
Fail-Safe Relay Inspection
1. Measure the resistance between terminals A and B of the fail-safe relay connector.
Resistance: 60 - 100 ohms
2. Inspect for continuity between the relay terminals.
3. If not as specified, replace the fail-safe relay.
ABS Motor Relay Inspection (Including Harness To ABS Control Module)
1. Inspect the fail-safe relay.
2. Turn the ignition switch to OFF and disconnect the ABS control module connector.
3. Turn the ignition switch to ON.