Protege LX L4-1489cc 1.5L DOHC MFI (1998)
Fuel Injector: Service and Repair
FUEL INJECTOR REMOVAL AND INSTALLATION
1. Complete the "BEFORE REPAIR PROCEDURE". (Refer to SERVICE PRECAUTIONS.)
2. Disconnect the negative battery cable.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
NOTE:
1. Use new fuel injector O-rings.
2. Apply a small amount of engine oil to the O-rings and install them into the fuel distributor.
3. Verify that the O-rings and the fuel injector sealing surfaces are free of foreign materials. Clean with gasoline if necessary.
4. Install the fuel injectors in the fuel distributor with light twisting motion so that the O-rings will not be folded.
5. Complete the "AFTER REPAIR PROCEDURE". (Refer to SERVICE PRECAUTIONS.)