Protege LX L4-1489cc 1.5L DOHC MFI (1998)
Crankshaft Position Sensor: Service and Repair
CRANKSHAFT POSITION SENSOR REMOVAL AND INSTALLATION
1. Remove the undercover.
2. Remove bolt A.
3. Remove bolt B and the bracket.
4. Install in the reverse order of removal.
Tightening torque: 7.9 - 10.7 N.m [80 - 110 kgf.cm, 70 - 95.4 in.lb)
5. Adjust the air gap.